Cerabar S PMC 731, PMP 731

The Cerabar S transmitter accurately measures the pressure of gases, vapours and liquids and is used in all areas of chemical and process engineering. The modular design of the Cerabar S enables it to be used in all industrial environments.

Cerabar S is available with a ceramic or metal sensor, overload resistant with function monitoring, and communication using HART, PROFIBUS-PA, Foundation Fieldbus

• Cerabar S PMC 731:
  Capacitive pressure measurement with dry ceramic sensor
  up to 40 bar (600 psi)
  - Resistant to overload and water hammer, vacuum-tight
  - Process connections:
  Threaded or flush-mounted ceramic sensor

• Cerabar S PMP 731:
  Piezoresistive pressure measurement with metal sensor
  up to 400 bar (6000 psi)
  - Process connections:
  Thread with flush-mounted metal diaphragm,
  e.g. for high-viscosity media, or internal separating
  diaphragm

Endress+Hauser, Kagenstrasse 7, CH-4153 Reinach/BL, Switzerland, Switzerland. Tel: +41 61 715 77 00; Fax: +41 61 715 77 01.

-110401-